赛跑网

 找回密码
 注册

QQ登录

只需一步,快速开始

快捷登录

查看: 1711|回复: 1

[其他] 接口表GL_INTERFACE中的字段STATUS表示的含义

[复制链接]
发表于 2016-3-28 23:05:46 | 显示全部楼层 |阅读模式
Oracle EBS子模块导入到接口表GL_INTERFACE中的数据,在字段STATUS中出现了'EF05' 'P'等错误状态。其中的'P状态不是错误的状态,是由于同一个组标示的其他的数据出现了问题。
出现的错误状态可能有:
期间错误代码
------------------
EP01    此日期不在任何打开的或将来可输入的期间内。
EP02    这个帐套没有任何已打开的或将来可输入的会计期
EP03    此日期不在打开保留年度的任何期间内。
EP04    此日期不是一个业务日。
EP05    在此会计期中不存在业务日。

不平衡的日记帐错误代码
------------------------------
WU01    警告:此日记帐分录不平衡。之所以被接受是因为在该帐套中允许暂记过帐。
EU02    此日记帐分录不平衡,并且在此帐套中不允许暂记过帐。
EU03    此保留款日记帐分录不平衡,并且未定义“保留款准备金”帐户。

弹性域错误代码
---------------------
EF01    此会计日期的会计科目弹性域不活动
EF02    此会计科目弹性域不允许明细过帐。
EF03 “不可用的会计科目编码”
EF04    这是无效的会计科目弹性域。检查您的交叉验证规则和段值
EF05    不存在具有此代码组合标识的会计科目弹性域。

外币错误代码
-----------------------------
EC01 您必须对“用户”的一个currency_conversion_type提供一个currency_conversion_rate
EC02    未提供折换日期。
EC03    在输入外币日记帐分录行时,必须提供折换率类型或入帐金额。
EC06    此币种、折换类型和折换日期不存在折换率。
EC08    币种代码无效。
EC09    未启用任何币种。
EC10    不能创建外币保留款日记帐。
EC11    折换率类型无效。
EC12    在本位币或 STAT 币种日记帐行中,输入金额必须等于入帐金额。
EC13    金额太大。
ECW1    警告:由于未指定折换率类型,因此无法验证折换额。

预算错误代码
------------------
EB01    必须为预算行提供预算版本。
EB02    不能为冻结预算创建日记帐。
EB03    预算年度未打开。
EB04    该帐套不存在此预算。
EB05    预算日记帐的 encumbrance_type_id 列必须为 NULL。
EB06    必须为预算日记帐提供期间名称。
EB07    此期间名称无效,请检查日历以便查找有效的期间。
EB08    不能为预算创建平均日记帐。
EB09    不能为预算指定来源公司信息。

保留款错误代码
-----------------------
EE01    必须为保留款行提供保留款类型。
EE02    保留款类型无效或被禁用。
EE03    不能创建 STAT 币种的保留款日记帐。
EE04    保留款行的 BUDGET_VERSION_ID 列必须为 NULL。
EE05    不能为保留款创建平均日记帐。
EE06    不能为保留款指定来源公司信息。

冲销错误代码
---------------------
ER01    必须提供冲销期间名称。
ER02    此冲销期间名称无效,请检查日历以便查找有效的期间。
ER03    必须提供冲销日期。
ER04    此冲销日期不在有效的期间内。
ER05    此冲销日期不是数据库日期格式。
ER06    冲销日期必须与有效日期相同或在有效日期之后。
ER07    此冲销日期不是一个业务日。
ER08    在冲销期间内中没有业务日。
ER09    未确定默认冲销信息。

说明性弹性域错误代码
---------------------------------
ED01 内容和属性值没有形成一个有效的对日记帐的说明性弹性域 - “日记帐分录行”
ED02 前后关联值和属性值没有对日记帐形成一个有效的说明性弹性域
ED03    对于增值税,上下文和属性值没有形成有效的的说明性弹性域。

其它错误代码
-------------------------
EM01    日记帐分录类别无效。
EM02    未定义任何日记帐分录类别。
EM03 无效的 set_of_books_id.
EM04 无效 “actual flag”: 必须是 "A" (实际), "B" (预算) 或 "E" (保留款)
EM05    实际日记帐的 encumbrance_type_id 列必须为 NULL。
EM06    实际日记帐的 budget_version_id 列必须为 NULL。
EM07    在输入 STAT 币种日记帐行时,统计额属于 entered_dr(cr) 列。
EM09    未定义事务处理代码
EM10    事务处理代码无效。
EM12    生成序列编号时出现 Oracle 错误。
EM13    分配的序号不活动。
EM14    由于缺少授权或同义词,因此产生了序列编号设置错误。
EM17    序列编号经常被使用,但此帐套和日记帐分录类别不存在分配。
EM18    人工单据序号不能与“日记帐导入”一起使用。
EM19    增值税数据仅在与实际日记帐结合时才有效。
EM21 “预算控制”必须能够引入该批
EM22 为这会计日期, 您的缺省折换率类型, 以及您的双重币种必须定义一折换率
EM23 对“双重币种缺省率类型”配置文件选项没有输入值
EM24    只能将平均日记帐导入到合并帐套中。
EM25    平均日记帐标志无效。有效值为 "Y"、"N" 和 NULL。
EM26    来源公司无效。
EM27    只有在启用公司间平衡后,才能指定来源公司信息。

Period Error Codes
------------------
EP01    This date is not in any open or future enterable period.
EP02    This set of books does not have any open or future enterable periods.
EP03    This date is not within any period in an open encumbrance year.
EP04    This date is not a business day.
EP05    There are no business days in this period.

Unbalanced Journal Error Codes
------------------------------
WU01    Warning: This journal entry is unbalanced.  It is accepted because suspense posting is allowed in this set of books.
EU02    This journal entry is unbalanced and suspense posting is not allowed in this set of books.
EU03    This encumbrance journal entry is unbalanced and the Reserve for Encumbrance account is not defined.

Flexfield Error Codes
---------------------
EF01    This Accounting Flexfield is inactive for this accounting date.
EF02    Detail posting not allowed for this Accounting Flexfield.
EF03    Disabled Accounting Flexfield.
EF04    This is an invalid Accounting Flexfield.  Check your cross-validation rules and segment values.
EF05    There is no Accounting Flexfield with this Code Combination ID.

Foreign Currency Error Codes
----------------------------
EC01    A conversion rate must be entered when using the User conversion rate type.
EC02    There is no conversion date supplied.
EC03    A conversion rate type or an accounted amount must be supplied when entering foreign currency journal lines.
EC06    There is no conversion rate for this currency, conversion type, and conversion date.
EC08    Invalid currency code.
EC09    No currencies are enabled.
EC10    Encumbrance journals cannot be created in a foreign currency.
EC11    Invalid conversion rate type.
EC12    The entered amount must equal the accounted amount in a functional or STAT currency journal line.
EC13    Amount is too large.
ECW1    Warning: Converted amounts could not be validated because the conversion rate type is not specified.

Budget Error Codes
------------------
EB01    A budget version is required for budget lines.
EB02    Journals cannot be created for a frozen budget.
EB03    The budget year is not open.
EB04    This budget does not exist for this set of books.
EB05    The encumbrance_type_id column must be null for budget journals.
EB06    A period name is required for budget journals.
EB07    This period name is not valid.  Check calendar for valid periods.
EB08    Average journals cannot be created for budgets.
EB09    Originating company information cannot be specified for budgets.

Encumbrance Error Codes
-----------------------
EE01    An encumbrance type is required for encumbrance lines.
EE02    Invalid or disabled encumbrance type.
EE03    Encumbrance journals cannot be created in the STAT currency.
EE04    The BUDGET_VERSION_ID column must be null for encumbrance lines.
EE05    Average journals cannot be created for encumbrances.
EE06    Originating company information cannot be specified for encumbrances.

Reversal Error Codes
--------------------
ER01    A reversal period name must be provided.
ER02    This reversal period name is invalid.  Check your calendar for valid periods.
ER03    A reversal date must be provided
ER04    This reversal date is not in a valid period.
ER05    This reversal date is not in your database date format.
ER06    Your reversal date must be the same as or after your effective date.
ER07    This reversal date is not a business day.
ER08    There are no business days in your reversal period.
ER09    Default reversal information could not be determined.

Descriptive Flexfield Error Codes
---------------------------------
ED01    The context and attribute values do not form a valid descriptive flexfield for Journals - Journal Entry Lines.
ED02    The context and attribute values do not form a valid descriptive flexfield for Journals - Captured Information.
ED03    The context and attribute values do not form a valid descriptive flexfield for Value Added Tax.

Miscellaneous Error Codes
-------------------------
EM01    Invalid journal entry category.
EM02    There are no journal entry categories defined.
EM03    Invalid set of books id.
EM04    The value in the ACTUAL_FLAG must be "A" (actuals), "B" (budgets), or "E" (encumbrances).
EM05    The encumbrance_type_id column must be null for actual journals.
EM06    The budget_version_id column must be null for actual journals.
EM07    A statistical amount belongs in the entered_dr(cr) column when entering a STAT currency journal line.
EM09    There is no Transaction Code defined.
EM10    Invalid Transaction Code.
EM12    An Oracle error occurred when generating sequential numbering.
EM13    The assigned sequence is inactive.
EM14    There is a sequential numbering setup error resulting from a missing grant or synonym.
EM17    Sequential numbering is always used and there is no assignment for this set of books and journal entry category.
EM18    Manual document sequences cannot be used with Journal Import.
EM19    Value Added Tax data is only valid in conjunction with actual journals.
EM21    Budgetary Control must be enabled to import this batch.
EM22    A conversion rate must be defined for this accounting date, your default conversion rate type, and your dual currency.
EM23    There is no value entered for the Dual Currency Default Rate Type  profile option.
EM24    Average journals can only be imported into consolidation sets of books.
EM25    Invalid average journal flag.  Valid values are "Y", "N", and null.
EM26    Invalid originating company.
EM27    Originating company information can only be specified when intercompany balancing is enabled.

最近访客

  • wx_41827
    2022-10-23
  • sapxf
    2022-01-25




上一篇:Profile:Sequential Numbering各個選項的含義
下一篇:R12 GL简明设置步骤
本楼点评(0) 收起
发表于 2016-4-5 10:41:44 | 显示全部楼层
本楼点评(0) 收起
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|联系我们|赛跑网 ( QQ:108519493QQfsq

GMT+8, 2024-3-29 06:29 , Processed in 0.149438 second(s), 34 queries .

Powered by 91SAP X3.4

© 2001-2023 91sap Team.

快速回复 返回顶部 返回列表